Previous
Next
AJ321 Water-Based Polyurethane Vacuum Pressing Adhesive
This adhesive, with good heat resistance, is an excellent choice for projects requiring relative durability and strength against heat. With a very good spray pattern and no orange peel effect, AJ321 provides an exceptional surface quality for various types of wood. Ideal for consumers seeking a balance between quality and price, AJ321 offers excellent tensile strength and adhesion, ensuring a reliable choice.
Product Advantages
Why choose AJ321 ?
- Good Heat Resistance: Suitable for projects requiring relative durability and strength against heat.
- Very Good Spray Pattern and No Orange Peel: Provides exceptional surface quality for various types of wood.
- Excellent Tensile Strength and Adhesion: The adhesive has high tensile strength and strong adhesion.
Application Method
- Before using the adhesive, ensure proper storage conditions and shake the container well.
- AJ321 is a water-based polyurethane product and should not be mixed with water or other chemicals.
- The vacuum machine must be technically sound. All its elements should be turned on, and it should reach a vacuum pressure of 0.7 bar at the appropriate time.
- MDF parts should be well and evenly sanded. The adhesive should be sprayed on the MDF surface in a dust-free environment at a temperature between 18 to 30°C and humidity of 55 to 60%.
- Spray the adhesive on the MDF surface with a spray gun from a distance of 10 to 15 cm. Edges and machined parts should be sprayed twice (with a very short interval between sprays).
- The nozzle diameter of the spray gun should be 1.8 to 2 mm. The standard air pressure for spraying is 3 to 4 bar.
- The adhesive consumption is about 50 to 70 gr/m² for flat surfaces and 80 to 110 grams for three-dimensional surfaces.
- The activation temperature of the adhesive is between 55 to 60°C.
- Place the glued part in the machine under appropriate temperature and pressure. Remove the coated MDF part from the vacuum membrane machine 2 to 3 minutes after turning off the heating system and suction.
- Allow the glued part to acclimate to room temperature for about 2 to 3 hours, then adjust the PVC angles.
Tips for Best Results
- Storage: Store the adhesive in a cool, dry place away from direct sunlight. The recommended storage temperature is between 10-30°C. Ensure the container lid is tightly closed.
- Cleaning: Tools and equipment used for applying the adhesive can be easily cleaned with water after use.
By following these tips, you can achieve optimal performance and durability with AJ321 Water-Based Polyurethane Adhesive for MDF parts!